Micromax Bharat 2 Q402 Charging Solution Jumper Problem Ways
q402 changing wa
Micromax Bharat 2 Q402 Charging Solution Jumper Problem Ways
Charging problem in Micromax Bharat 2 Q402 can be caused by damaged charging pin and water damage. In the event of a charging problem, the mobile cannot save energy in the battery and it may display a false charge. Under false charging condition, you can only see the charge in the mobile, but it will not save electricity.
In Image,
In Image there is differwnt colours of line drawed on Micromax Bharat 2 Q402 board this line are missing or breakdown on board, Hence this is the resonse of error or fault created in the smartphone . If you want to solve this problem make the jumper same as same in image on your mobile .This way you can solved your problem.
Micromax Bharat 2 Q402 Loading solution Jumper problem
some charging problems Micromax Bharat 2 Q402 Charging solution Jumper Problem Means Charging is not supported
After disassembling the mobile phone, you need to perform some steps as shown in the above diagram. check the charging plug and its points if they have a good value, if yes, change the charger and check it and if the charging points on the motherboard do not show an accurate value with the meter, you need to check all parts and tracks shown in Micromax Bharat 2 Q402 Diagram.
Look at the motherboard, carefully vary if there is rust or carbon and water damage or if any part is damaged. if a track is missing, install the jumpers as shown and if any part is damaged or broken, replace it with a new one.
Keep visiting this page for more information and new tips and tricks on this troubleshooting, we will update when new updates arrive. Below you will also find some related articles, you can learn more about mobile phones.
Please note that although every diagram and solution displayed on our website has been tested by one or more of our team before posting, we are not responsible for any loss or damage, including personal injury. Use this repair solution at your own risk.
