Here we are going to show you untested and working solution of RealMe 2 LCD backlight show problem light way and show related problem if you going to solve display problem then blank display, dark screen display, white screen (with tone) , No backlight LED issues that are caused by users getting wet or accidentally left on.
Damage problem with oppo realme 2 no backlight is often symptomatic like lcd with no display, lcd screen is white. Or in general, the light is not generated by the LCD screen but the ringing and notification sound can still be heard.
What is Reality 2 LCD or Backlight?
Initially, the LCD is your phone’s digital display interface, the interactive part where you see what happens when you act or tap on an icon, watch a video, play music or games, etc. When the LCD (Liquid Crystal Display) is damaged or damaged, you will not be able to enjoy as before. This is where the LCD backlight comes in, the backlight is equipped with LEDs (light emitting diodes) to illuminate the LCD screen and the screen is perfect in layers.
RealMe 2 LCD backlight problem solved
To fix the dark screen Realm2 backlight issue, you can easily try to replace or install a new display screen module to confirm if the backlight LED of the LCD is still working or is already damaged. can. If you can manage without damaging the LCD flex connector, you can check the LED using a multimeter. If the newly installed LCD still shows the same problem and the LED light does not illuminate, refer to the solution below and find the highlighted components on the PCB board.
Realme 2 Backlight Problems:
- White display
- No display
- Lion on display
- Low light on display
- No backlight
If the realme 2 phone is having one of the above mentioned symptoms. Then some repair steps can be taken to eliminate the damage.
- Change the LCD Screen
The first thing to do in case of this kind of damage is to try to replace the new LCD part in good condition. If your phone is cracked or cracked on the screen, it can be firmly fixed by falling. By trying to replace the new LCD, hopefully this harmful problem can be solved.
- Check Line and LCD Socket
No backlight damage to the phone can be caused by liquid entering the phone. And damages the line and the LCD socket on the motherboard. So, to fix this, it is recommended to uninstall all parts of the phone for inspection. Typically, water on the tracks and sockets will corrode and rust and affect the braking path. So to repair the stairs, clean the rust and rust, if any path is broken, then fix it immediately with the path jumper method.
- Inspect and replace internal components
If the LCD and the line are in good condition, but suddenly your phone’s backlight goes off. Then it can definitely cause problems with the internal components. The figure provided by the Mobilintech team can be a guide for you in trying to damage the image backlight.
Measure on each component, if there is a faulty component, start immediately with components of the same type and value. Try checking the components of the diode as well as the coils marked on the figure image. Often the component malfunctions and the resulting backlight display is visible.