Samsung Galaxy J1 J100 charging ways
The charging problem in Samsung Galaxy J1 J100H can be caused by damage to the broken charging pin and water damage. In the event of a charging problem, the mobile cannot save battery power and may display a false charge. Under false charging condition, you can only see the charge in the mobile, but it will not save electricity.
J1 J100 charging ways
J1 J100 charging Jumper Solution
J1 J100 usb charging ways
J1 J100 charging ways
Samsung Galaxy J1 SM-J100H Means Charging Solution Fix Jumper Problem
Today we are going to talk about Samsung Galaxy J1 J100H charging or charging problems, charging or charging problems that all brands of mobile phones in this world often face, this problem would cause gadgets to be dead lice or mobile phone users . Samsung J100H charging damage usually occurs due to the plug-ins that are damaged. Here are the steps to fix the charging problem.
The first step is to replace the charging plug or charger connector, usually damaging the pin or needle of the charging plug. If after replacing the plug-in the problem is not resolved. Try the next step.
Reasons for the problem
- The phone can be damaged by water.
- Dust particles may be present in the charging connector.
- Your charger may be defective.
- The connection to the phone may have been lost.
- The phone was physically damaged.
- One of the capacitors may be defective.
- The charging IC may be defective.
- You can easily remove the dust on the charging connector using a brush.
- If the same problem, replace the charging connector and check.
- If the same problem Check the charging connector tracks.
Samsung Galaxy J1 J100H Charging Solution Jumper Problem
only charging problem Samsung Galaxy J1 J100H Charging solution Jumper problem Charging means not supported
after disassembling the mobile phone, you need to do some steps as shown in the above diagram Check if the charging socket and points have a good value, if so replace the charger and check it and if the charging point on motherboard are not an exact value indicate with meter, you need to check all parts and tracks listed in the schematic of Samsung Galaxy J1 J100H.
Watch how the motherboard varies carefully if there is rust or carbon and water damage or if any part is damaged. If any track is missing fit jumpers as shown and if any part is damaged or broken replace with new one
Keep visiting this page for more information and new tips and tricks on how to fix this problem, we will update when there are new updates.
If problem not solve comments below👇👇👇